Article

How to Fix a Brevo Account Suspended for High Bounce Rate

By Unlimited Verifier Team ·

Flowchart showing how to fix a Brevo account suspended for high bounce rate: find the source list, verify contacts, and restart sending in stages.

Summary

A Brevo account is usually suspended for high bounce rate after a campaign sends to an old or unchecked list. Brevo doesn't publish a confirmed threshold, so the safe approach is to keep total bounces under 2% per campaign and under 1% when you restart. Find the source list, verify your database, and resume in stages.

A Brevo account is suspended for high bounce rate when a send produces a spike in failed deliveries, usually from an old or unchecked list. Brevo (formerly Sendinblue) doesn't publish a confirmed cut-off, so plan around a 2% total bounce ceiling per campaign and aim for under 1% when you restart sending.

The fix has three parts: find the list behind the spike, prove with counts that the bad addresses are gone, and restart in measured stages. For the wider picture of why suspensions happen, start with our high bounce rate suspension guide.

Quick answer

What does a Brevo "high bounce rate" suspension actually mean?

It means Brevo wants evidence that your list is clean before more mail goes out. The notice is a request for proof, not a final verdict, and its wording and restriction type vary from account to account.

Brevo's review will focus on the per-campaign bounce rate, the share of hard bounces, and any complaint activity. Transactional mail sent from the same account, such as password resets and order confirmations, can also count toward the picture, so check those logs alongside your campaigns.

Like most ESPs, Brevo sends for many customers on shared infrastructure. A list that generates repeated bounces can hurt delivery for everyone on it, which is why the response tends to be strict and why a numbers-based reply matters more than an apology.

Bottom line: The notice asks for evidence. Show which list caused the spike, what you removed, and how you will stop it recurring.

Which bounce rate gets a Brevo account suspended?

Brevo doesn't publish a bounce-rate threshold we could confirm, so plan around 2% total bounces per campaign and treat anything above that as a warning sign. Other providers publish figures that show how ESPs think about the risk.

Source Published figure What it measures Practical note
Amazon SES documentation Describes 5% as a review level and 10% as a level that can lead to a pause Bounce rate Platform-specific, but a useful reference for how ESPs weigh bounces
Google's sender guidelines Advises keeping spam rates below 0.1% and never reaching 0.3% User-reported spam A complaint limit, not a bounce limit, aimed at bulk senders
Yahoo sender requirements Sets spam-rate expectations for bulk senders Complaints Check the page for current figures before relying on any number
Brevo No threshold confirmed in public sources we reviewed Not specified Treat enforcement as discretionary and evidence-driven
Our recommendation 2% ceiling; under 1% on re-entry Total bounces per campaign Leaves room before any provider's automated trigger

Where sources disagree, the gap is your margin. SES's 5% review level is far above the 2% we recommend, but an ESP that sees a purchased or scraped list may act earlier than any published figure suggests. One number is easier to act on than a range, so use 2% as the ceiling and 1% as the target for restarting.

Bottom line: Plan around 2% total bounces per campaign, and aim for under 1% when you restart.

Why do bounces trigger suspensions, and how do you tell the types apart?

Bounces trigger suspensions because they signal that you have been sending to addresses that don't exist or don't accept mail. The SMTP enhanced status code in each bounce tells you the type of failure, and that code decides whether the problem is your list or something else.

The codes are defined in RFC 3463. The first digit shows whether the failure is temporary (4) or permanent (5). The rest of the code gives the specific reason.

Code Typical meaning Counts as a list problem? What to do
5.1.1 Mailbox doesn't exist Yes Suppress permanently
5.1.2 Destination domain or system doesn't exist Yes Suppress, and check for typos such as "gmial.com"
4.2.2 Mailbox full No, temporary Retry; suppress only after repeated failures
5.7.1 Delivery refused by recipient policy No, usually reputation or authentication Check SPF, DKIM and DMARC, and review complaint rates
Repeated 4.x.x Temporary failure that never clears Often yes Treat as dead after about three failed sends (a common rule of thumb)

The distinction matters for your appeal. If you remove addresses after a wave of 5.7.1 rejections, a reviewer will see that the list wasn't the root cause. Count only the 5.x.x "bad address" codes as list problems, and describe 5.7.x rejections separately with the fix you made, such as adding authentication records.

Bottom line: Only "bad address" codes are list problems. Mixing in policy rejections makes a clean list look dirty and weakens your appeal.

How do you fix a Brevo bounce problem and get reinstated?

Work through these steps in order. Each one produces evidence you will cite in your reply. If you are still deciding whether the spike needs an appeal at all, bounce rate suddenly spiked, what should I do? covers the earlier triage.

  1. Pause sending and preserve the evidence. Export campaign statistics, the bounce log with SMTP text, and the import history for every list involved. Don't resume until Brevo confirms you can, because each extra bounce weakens your case.
  2. Trace the spike to its source. Compare bounce rates by list, import date and acquisition channel. A useful pattern to look for is a cluster of bounces in the first send after a bulk import, which points to the imported data rather than your regular audience.
  3. Export everything, including suppressed contacts. Keep your own suppression file of hard bounces, unsubscribes and complaints. Suppression flags inside a platform may not survive an export and re-import, so don't rely on them alone.
  4. Verify the full database. A campaign to one segment tells you nothing about unmailed contacts. Dead addresses often sit in segments that haven't been mailed for months, and those are the ones that bounce next.
  5. Fix authentication if 5.7.x codes appear. Google's sender guidelines call for bulk senders to authenticate mail and publish a DMARC policy. If your sending domain lacks SPF, DKIM or DMARC, the rejections won't stop when the list is clean.
  6. Rank the Valid remainder by recent engagement. Send first to people who opened or clicked recently. Engaged contacts dilute any leftover risk.
  7. Reply with counts and run a staged restart. Send the appeal through Brevo's support channel, then ramp volume while publishing per-send bounce figures. For the appeal itself, see how to get an ESP account reinstated after bounces. If you need the shorter version, 5 steps to take after a bounce rate spike covers the same ground.

Bottom line: Steps 2 and 4 produce the numbers that make the appeal credible. Step 5 keeps authentication errors from being blamed on your list.

Which verification option should you use for a Brevo list?

You can clean a Brevo list four ways: suppress contacts that already bounced, run a re-engagement send, verify with a bulk tool, or verify at signup through an API. Each catches a different set of problems, so use more than one.

Option What it catches What it misses Cost for an 84,048-contact list Best use
Suppressing contacts that already bounced Addresses that failed in past sends Every address that hasn't been mailed yet Platform feature Baseline, not proof of a clean list
Re-engagement campaign Unengaged contacts It sends to unverified addresses, adding bounces during review Sending volume and reputation risk Later hygiene, once the list is verified
Bulk verification of a CSV Bad syntax, dead domains, missing MX, nonexistent mailboxes, disposable and role addresses, catch-all domains Consent and engagement Unlimited standard checks; Pro is $29/month, or $25/month billed annually The evidence you cite in your appeal
Verification API at signup New bad input before it reaches your database Existing contacts, unless you also run batches Included in Pro's 100,000 API emails a month Ongoing prevention

For retailers and SaaS teams, email verification for ecommerce and SaaS usually means verifying the import path as well as the database, since most spikes start with a new batch of contacts.

Unlimited Verifier is a bulk email verification tool that checks syntax, domain, MX records and the SMTP mailbox, detects catch-all domains, and flags disposable and role-based addresses. Results are sorted into Valid, Risky and Invalid, so each bucket maps to a clear action. The company states 99.5% accuracy for deep verification, a figure it publishes itself rather than one from an independent test. The free email checker suits spot-checks on single addresses, and the engine is published as open source at github.com/unlimitedverifier/free-email-verifier, so you can read the checks it describes.

When you compare the best email verification tools, check how each one labels results. Some verifiers add statuses such as catch-all, unknown or spam-trap. Map anything that signals a trap or complaint history to Invalid, and treat uncertain results as Risky rather than Valid. Our buyer's checklist for choosing a verifier covers the other questions to ask.

Bottom line: Use bulk verification for the appeal and the API for prevention. Platform suppression alone only covers addresses that have already failed.

How do you clean a Brevo list with Unlimited Verifier?

Follow these steps to turn a Brevo contact export into three clean files. The whole process takes an afternoon for a list of this size.

  1. Export each list from Brevo as CSV. Include the email column and any fields that show engagement or import source, such as last-open date or import batch. Export hard-bounced and suppressed contacts separately for your records.
  2. Trim the file. At roughly 30 bytes per row, a 25,000-row file with only an email column is about 0.75 MB. Wide exports with many columns grow much faster, so remove anything you don't need before upload.
  3. Choose the plan. The Free plan covers 25 lists a month of up to 150 emails each, which suits a test but not a full database. Pro handles unlimited lists of up to 25,000 emails each. It costs $29 a month, or $25 a month billed annually.
  4. Sign up and choose your plan.
  5. Upload and verify a list. CSV and Excel files up to 10MB are accepted, and the email column is detected automatically. Split any list over 25,000 rows into files of 25,000 or fewer.
  6. Read the three buckets. Valid addresses are safe for re-entry. Invalid addresses should be suppressed permanently. Catch-all, disposable and role-based flags are hold-back signals, so check how your export labels each one before you send. For catch-all results specifically, see the catch-all email verification page.
  7. Export results as CSV, Excel or JSON. Results are kept for 30 days on Pro and 24 hours on Free, so export promptly. Save the summary counts, since they go straight into your appeal.
  8. Re-import Valid contacts into Brevo as a new list. Keep the Invalid file as your suppression record outside Brevo, and hold Risky contacts until the end of your restart.
  9. Add the email verification API for prevention. It checks single addresses or batches of up to 10,000 per request, which suits signup forms. For implementation patterns, see email verification API and automation and real-time email validation.

Brevo has no native Unlimited Verifier integration, so the workflow is export, verify, re-import, or calling the API from your own scripts.

Bottom line: Export, verify, keep Valid, suppress Invalid, hold flagged addresses, and save the counts.

What does a real cleanup look like, with numbers?

The scenario below is illustrative, and the verification percentages are hypothetical. The arithmetic and plan limits are real.

The situation: A retailer on Brevo has 85,000 contacts. It imported 22,000 contacts from a partner's list and sent one campaign to those 22,000 plus 16,000 engaged subscribers, 38,000 in total. The campaign produced 1,064 bounces:

1,064 ÷ 38,000 = 2.8% overall bounce rate

The bounces split by segment:

Imported: 900 ÷ 22,000 = 4.1% Engaged: 164 ÷ 16,000 = 1.0%

The imported segment was 58% of recipients (22,000 ÷ 38,000) but produced 85% of bounces (900 ÷ 1,064). Brevo paused the account. If the partner list had been migrated from another platform, emails bouncing after switching email providers explains the usual causes.

Cleaning:

  1. Remove known hard bounces. Of the 1,064 bounces, 812 were hard (780 from the imported segment, 32 from the engaged one). That leaves 85,000 − 812 = 84,188 contacts. The 252 soft bounces stay and get verified.
  2. Remove unsubscribes and complaints. 84,188 − 140 = 84,048 contacts remain.
  3. Split for Pro's 25,000-per-list cap. Upload 25,000 + 25,000 + 25,000 + 9,048 = 84,048. Standard checks are unlimited, so a second pass to fix errors adds nothing to the bill.
  4. Allocate deep verifications. The imported segment has 22,000 − 780 = 21,220 addresses left. Deep-verify those within the monthly allowance of 25,000, which leaves 25,000 − 21,220 = 3,780 for spot-checks.

Hypothetical results:

Bucket Count Share Action
Valid 76,500 91.0% Restart in stages
Risky 4,700 5.6% Hold back; test at the end
Invalid 2,848 3.4% Suppress permanently

Most of those 2,848 Invalid addresses sat in the 47,000 contacts the campaign never reached (85,000 − 38,000). Without full-database verification, they would have caused the next spike.

Cost: One Pro month at $29 covers 84,048 emails, about $0.35 per 1,000 addresses. On the annual plan at $25 a month, it's about $0.30 per 1,000.

Restart plan (Valid contacts, most engaged first):

Day New recipients Running total Bounce ceiling
1 6,000 (opened in last 30 days) 6,000 0.5% (≤ 30 bounces)
3 10,000 (opened in last 90 days) 16,000 1% (≤ 100 bounces)
7 20,000 (remaining engaged Valid) 36,000 1% (≤ 200 bounces)
14 40,500 (remaining Valid) 76,500 1% (≤ 405 bounces)

Set a stop rule. If any send exceeds its ceiling, pause for 48 hours, re-verify the bounced addresses, and resume at half the planned volume. Test the 4,700 Risky contacts only after day 14 stays under 1%, beginning with a batch of about 500 catch-all addresses.

For how long a bad campaign affects inbox placement, see does one high-bounce campaign hurt deliverability for weeks? For a cautious restart on older lists, read how to send to an old email list safely.

Bottom line: A $29 month and a few hours of work turn "we cleaned the list" into an audit with exact counts.

What should your Brevo reply contain?

A strong reply is short, specific and covers five items:

Brevo doesn't publish review timelines, so plan for an open-ended wait and keep sending paused until you hear back. If Brevo asks about consent, have the evidence ready: signup timestamps, the consent wording shown on each form, and the source of every list. The FTC's CAN-SPAM compliance guide sets baseline obligations for commercial email sent to US recipients. Email verification compliance and hygiene matters here too, but verification confirms that an address exists, not that the person agreed to receive mail.

Bottom line: Lead with the cause, quote the counts, and commit to a ceiling you can measure.

What mistakes make Brevo suspensions worse?

If Brevo is one of several platforms you use, the root causes are similar across providers even though each review process differs. Compare Mailchimp suspensions, SendGrid's "under review" status and Constant Contact suspensions for bounces. To prevent the next one, follow email list maintenance best practices.

Bottom line: Most mistakes come from cleaning too little, too late, or in a way you can't reproduce.

How we compared (and limitations)

This guide is based on public documentation: Amazon SES's published thresholds, Google's and Yahoo's sender requirements, and the SMTP enhanced status code definitions in RFC 3463. We have not tested Brevo's review process and don't know its internal criteria, so treat any restriction timeline as variable.

The Unlimited Verifier figures come from the company's published plan details. The 99.5% accuracy figure is the company's own statement about deep verification, not an independent benchmark. The worked example uses hypothetical verification results. The arithmetic is accurate, but the percentages are illustrative, and your own list will produce different numbers.

Staged restart plan

  1. Export your full contact list and verify every address.
  2. Remove all Invalid and dead addresses (codes 5.1.1 and 5.1.2 in your logs).
  3. Send first to your most engaged contacts, such as those who opened or clicked in the last 30 days.
  4. Check the bounce rate after each send. If it is above 1%, stop and investigate before continuing.
  5. Widen the audience gradually over about two weeks, checking each stage.
  6. Keep a written record of counts at every step to include in your reply to Brevo.

Frequently asked questions

What bounce rate causes a Brevo account suspension?

Brevo doesn't publish a confirmed bounce-rate threshold. Plan around keeping total bounces under 2% per campaign, and aim for under 1% when you restart. Brevo's review also considers hard bounces and complaint activity, so a low bounce rate alone doesn't guarantee your account stays in good standing.

How long does a Brevo bounce suspension last?

There is no fixed duration that applies to every account. Restrictions are typically lifted after Brevo reviews the evidence you provide. Respond with clear counts showing which list caused the spike, what you removed, and your plan to prevent a repeat. A complete, numbers-based reply usually moves review along faster.

How do I find which list caused the bounce spike in Brevo?

Start with the campaign statistics for the send that raised your rate, then check your contact import history to see which list or import added the affected addresses. Compare the hard bounce counts against each list's source and age. Lists that were bought, scraped, or not sent to in a long time are the most common culprits.

What is the difference between a hard bounce and a soft bounce?

A hard bounce is a permanent failure, such as a non-existent or invalid address, and should be removed from your list. A soft bounce is temporary, such as a full mailbox or a server timeout, and may succeed later. Codes like 5.1.1 and 5.1.2 indicate dead addresses, while 5.7.1 indicates a policy or reputation rejection that cleaning alone won't fix.

Should I verify my whole Brevo contact database or just the failed addresses?

Verify the full database. Checking only the failed send shows you cleaned up the symptom but not the cause. Verifying every contact gives you evidence that the rest of your list is safe to mail and makes your reply to Brevo far more credible.

Can transactional emails cause a Brevo bounce suspension?

Yes. Transactional mail sent from the same account, such as password resets and order confirmations, can count toward your overall delivery picture. Review those logs alongside your campaigns, and fix any invalid addresses that appear there, since they can contribute to the same problem.

How should I restart sending after a Brevo bounce suspension?

Restart in stages over about two weeks. Begin with your most engaged contacts, who are the least likely to bounce, then widen the audience gradually. Set a stop rule: if a send's bounce rate passes 1%, pause, investigate the segment, and remove the bad addresses before continuing.

Will removing bounced contacts fix my Brevo account?

Removing bounced contacts is necessary but not always enough on its own. You also need to show you've identified the source list, verified the rest of your database, and changed how you collect and import contacts. Without those steps, the same issue can recur and trigger another review.

Does a high bounce rate also cause spam complaints?

They are related but separate. Bounces are failed deliveries, while complaints happen when recipients mark your mail as spam. Sending to outdated or purchased lists tends to produce both, so track complaint rates alongside bounces and keep an eye on any complaint activity in your Brevo reports.

Cut Bounces and Protect Your Sender Reputation With Unlimited Email Verification

Every invalid address you send to hurts your sender reputation and your inbox placement. Verifying your list before each send means fewer bounces, healthier deliverability, and a predictable cost. With Unlimited Verifier, standard verification is unlimited on every plan, with no per-email fees.

Unlimited Verifier checks syntax, domain, MX records and the SMTP mailbox. It also detects catch-all domains and flags disposable and role-based addresses. Export a CSV from your email platform or CRM, upload and verify the list, then re-import the clean results. You can also automate checks with the email verification API.

Free Pro
Price $0 $29/month ($25/month billed annually)
Lists 25 a month, up to 150 emails each Unlimited, up to 25,000 emails each
Deep verifications 750 a month 25,000 a month
API access No Yes (100,000 emails a month)
Result retention 24 hours 30 days

Why teams choose Unlimited Verifier

Unlimited Verifier states 99.5% accuracy for deep verification.

Create a free account and verify your next list before you hit send.

Want to test a single address first? Try the free email checker.