Article

550 5.7.1 Message Rejected: How to Diagnose and Fix It

By Unlimited Verifier Team ·

Diagnostic flowchart showing how to read a 550 5.7.1 message rejected bounce and split causes by single or multiple providers.

Summary

A 550 5.7.1 bounce means the receiving server refused your message on security or policy grounds, and retrying the same message won't succeed. Read the full bounce text to find the named cause, then fix blocklists, authentication, reputation or content before resending.

A 550 5.7.1 bounce means the receiving server refused your message on security or policy grounds, and it is a permanent failure, so retrying the same message won't help. Read the complete bounce text first, because the words after the code usually name the cause, then fix that cause before you resend.

This guide is for marketers, list owners, agencies and SaaS teams whose messages are being refused with 5.7.1 and who need a diagnosis and a fix. It ranks seven fixes by how directly they address the causes behind the code, shows how to identify your cause, and includes a worked list-cleaning example. If you're new to bounce codes, start with our email bounce codes guide. SaaS teams sending product email should also read about email verification for ecommerce and SaaS.

Quick answer

What does 550 5.7.1 mean?

550 is the generic SMTP reply for a permanent failure, defined in RFC 5321. The enhanced code 5.7.1 follows the structure in RFC 3463: class 5 means permanent failure, subject 7 is the security or policy category, and detail 1 means "delivery not authorized, message refused."

The practical point is that 5.7.1 records a decision the receiving system made about your message or sending infrastructure. Compare it with 550 5.1.1 user unknown, which says the mailbox doesn't exist. Because the enhanced code is shared across many causes, each provider writes its own explanation, and that wording is what separates a blocklist from an authentication failure. If your bounce reads 554 5.7.1 instead, the same logic applies; see what does 554 5.7.1 mean. For the full code map, see our enhanced SMTP status codes list.

Bottom line: 5.7.1 is a verdict on your sending, so the fix usually lives in your infrastructure and habits, even when a dirty list triggers it.

Which fixes work best for 550 5.7.1?

Diagnose first, then apply the fix that matches the cause the bounce text names. For list-driven rejections, verifying and cleaning the list is usually the highest-impact step.

Quick picks

Because this query is about fixes rather than products, the list ranks fixes. Unlimited Verifier is the recommended tool for the list-hygiene fix specifically.

Fix Addresses Effort Time to see effect Best for
1. Diagnose the bounce text Every 5.7.1 variant Low Immediate Everyone, first
2. Blocklist check and delisting Listed IP or domain Low to medium Varies by list Bounces naming a blocklist
3. SPF, DKIM, DMARC, reverse DNS Authentication failures Medium After DNS propagation Custom domains, new senders
4. Verify and clean the list Invalid and risky addresses Medium, recurring From the next send Rising hard bounces
5. Sunset and complaint control Engagement and complaint signals Medium Over several sends Older lists
6. Content and link audit Content-triggered blocks Low to medium Next campaign Single-campaign rejections
7. Pause, suppress, escalate Ongoing damage Low Immediate Every case

Bottom line: diagnose first, fix the cause the text names, then use list and engagement fixes to keep that cause from returning.

How we compared (and limitations)

We ranked each fix against five criteria:

  1. Cause match: does the fix address a cause that bounce text commonly names?
  2. Mechanism: does it change something receiving servers actually evaluate, such as authentication, blocklist status, complaints or invalid-address bounces?
  3. Effort and reversibility: how much work is it, and can you undo it?
  4. Time to effect: how quickly would you expect to see movement?
  5. Cost: most fixes are free apart from staff time.

Limitations. This comparison is based on public documentation from standards bodies, mailbox providers and blocklist operators. We did not run controlled tests of any provider's filtering. Providers don't publish their reputation algorithms, those algorithms change, and 5.7.1 wording varies by provider. The ranking reflects typical senders, not your reputation history, so treat it as a sequence to work through, not a guarantee.

Bottom line: the sequence holds across most cases, but your exact cause has to come from your own bounce data.

How do the seven fixes work in practice?

Each fix targets a different cause, so the order matters: read the text, rule out blocklists and authentication, clean the list, then control complaints and content.

1. Read the full bounce text and match it to a cause

The enhanced code is shared across many causes, so the words after it do the diagnostic work. Providers often split long explanations across lines, and the most useful detail can sit at the end, next to a support link. Copy every line before you change anything.

Bounce text contains Likely cause Go to
A blocklist name, such as Spamhaus Listed IP or domain Fix 2
"authentication," "DMARC," "SPF" or "DKIM" Failed authentication Fix 3
"reverse DNS," "PTR" or "rDNS" Missing or mismatched PTR record Fix 3
"reputation," "unsolicited" or "suspicious" Sender reputation Fixes 4 and 5
"content" or "spam" Content or link triggers Fix 6
"relay," "access denied" or "recipient restriction" Your relay setup or the recipient's rules See 550 5.4.1 recipient address rejected

Then check the pattern. Count rejections by recipient domain across your last few sends in your ESP logs. If only one provider rejects, suspect reputation or authentication at that provider. If several unrelated providers reject at once, suspect a blocklisted IP or shared infrastructure. This pattern check often narrows the cause in a single session.

Key features

Pros

Cons

Best for: every 5.7.1, as the first step.

Where it falls short: a text match suggests a cause but doesn't prove it. Confirm with a blocklist lookup or an authentication check.

Pricing: free.

Tip: save the bounce text and timestamp before editing anything. Providers sometimes change wording, and that record is what you'll need if you appeal.

Bottom line: the bounce text plus the pattern across recipient domains usually identifies the likely cause.

2. Check your sending IP and domain against blocklists

Blocklists (DNS-based blocklists, or DNSBLs) publish IP addresses and domains associated with spam. Receiving servers query them during delivery and may refuse a listed sender. Spamhaus is one widely referenced operator, but many others exist, and each has its own listing criteria and delisting process.

Check two things: the sending IP (from the Received headers of a test message or your ESP's dedicated IP settings) and the sending domain (the domain in your From address and links). For example, if your dedicated IP were 203.0.113.25 (an address from a reserved documentation range, used here for illustration), you would look it up across several lists and record any listing, its stated reason and its removal route. Unlimited Verifier's free domain blacklist checker covers the domain side.

Key features

Pros

Cons

Best for: 5.7.1 messages that name a blocklist or fail across many recipient domains at once.

Where it falls short: a clean lookup doesn't reveal a provider's private reputation score, so a clean result doesn't rule out a reputation block.

Pricing: many lookups are free; delisting costs time.

Tip: fix the root cause first (usually a compromised account, a purchased list or a complaint spike), then request removal with a short written account of what changed.

Bottom line: a blocklist hit is among the few 5.7.1 causes with a concrete, checkable fix, so rule it in or out early.

3. Fix SPF, DKIM, DMARC alignment and reverse DNS

Google's sender guidelines set authentication expectations for bulk senders, which Google defines as those sending 5,000 or more messages a day to Gmail. In practice that means authenticating outgoing mail with SPF or DKIM, publishing a DMARC policy, and having valid forward and reverse DNS for sending IPs. Treat these as a floor, since other providers apply their own rules.

Work through these in order:

  1. SPF: publish one SPF record that lists every service sending for your domain. Two SPF records make the check fail (RFC 7208).
  2. DKIM: enable signing in your ESP and confirm the d= domain matches your sending domain.
  3. DMARC: publish a record with p=none first, review the reports, then move to quarantine and later reject (RFC 7489).
  4. Alignment: the domain in your visible From address must align with the domain that passes SPF or DKIM.
  5. Reverse DNS: the sending IP's PTR record should resolve to a hostname that resolves back to the same IP. Your host or ESP usually controls this.

Worked example. Your From domain is example.com, but your ESP signs DKIM with its own domain, and your SPF record contains a typo that causes a permanent error. DKIM passes only for the ESP's domain, so it doesn't align with example.com. SPF fails outright. DMARC fails both ways. Fixing the SPF typo and enabling custom-domain DKIM addresses both failures.

Key features

Pros

Cons

Best for: custom-domain senders, new domains, and any bounce text mentioning authentication, DMARC or reverse DNS.

Where it falls short: it can't repair a list full of complaints or a blocklisted IP.

Pricing: free aside from configuration time.

Tip: use DMARC aggregate reports to find senders you forgot about, such as a CRM or invoicing tool sending as your domain.

Bottom line: authentication is the highest-leverage fix for most "authentication" and "reverse DNS" variants of 5.7.1.

4. Verify and clean the list driving your reputation

Receiving systems judge you partly by what happens when you send. Invalid addresses produce hard bounces. Catch-all domains accept mail at SMTP time, so their failures can surface later. Disposable and role-based addresses often come from low-quality sources. Verifying the list before a send removes many of these signals, and it matters most after an import or a long gap between sends. Many ESP guides treat hard-bounce rates around 2% as a warning level. For a practical target, keep hard bounces under 1% per send, which leaves margin before a provider intervenes.

Unlimited Verifier accepts a CSV or Excel file (up to 10MB) with automatic email-column detection. It checks syntax, domain, MX records and the SMTP mailbox, detects catch-all domains, flags disposable and role-based addresses, and sorts results into Valid, Risky and Invalid. Standard verification is unlimited on every plan, with no per-email fees. For signup-time checks, see real-time email validation.

Worked example. Take a 60,000-address list where 2% of addresses are invalid (an illustrative figure). Each send would produce about 1,200 hard bounces. Splitting the list for the Pro plan's 25,000-per-list cap gives three files: 25,000, 25,000 and 10,000. Quarterly full-list checks come to 4 × 60,000 = 240,000 checks a year, and the annual Pro plan costs $25 × 12 = $300 a year. The Free plan allows 150 emails per list and 25 lists a month, so 25 × 150 = 3,750 emails a month. A list this size needs Pro.

Key features

Pros

Cons

Best for: lists with rising hard bounces, lists from events or partners, and any list not checked in a quarter.

Where it falls short: catch-all results are predictions, not confirmations, because those servers accept any address. The tool also can't address the other six causes.

Pricing: Free is $0 (25 lists a month of up to 150 emails each, plus 750 deep verifications). Pro is $29 a month, or $25 a month billed annually.

Tip: verify the full list before a campaign, then check only new signups weekly.

Bottom line: cleaning is often the quickest way to reduce repeat 5.7.1 rejections across a whole list, and a first pass is usually a single working session.

5. Retire inactive subscribers and control complaints

Spam complaints are among the strongest reputation signals you control. Google's sender guidelines recommend keeping the spam rate in Postmaster Tools below 0.10% and say never to let it reach 0.30%. Some guides quote other thresholds. We recommend 0.10% as the working target, because 0.30% leaves little margin.

Worked example. If you sent 40,000 messages and received 60 spam complaints, your complaint rate is 60 ÷ 40,000 = 0.15%. That's above the 0.10% target but well under the 0.30% ceiling. It's a signal to tighten sourcing and sunset policy before the rate climbs.

Key features

Pros

Cons

Best for: older lists, lists with many inactive subscribers, and senders whose complaint rate is climbing.

Where it falls short: a sunset policy doesn't replace verification and can't fix authentication or blocklisting.

Pricing: free aside from the time to build sequences and reporting.

Tip: group complaints by acquisition source. One source often accounts for most of them, and dropping that source is faster than reducing volume to everyone.

For a broader program, see email list maintenance best practices.

Bottom line: complaint control is slower to act than verification, but it keeps a clean list from becoming a reputation problem again.

6. Audit content, links and sending patterns

Content-triggered 5.7.1 is usually specific to one template or campaign. Providers don't publish their content filters, so treat content as one signal among several. Patterns that commonly draw scrutiny include link domains unrelated to your From domain, shared URL shorteners, mismatches between link text and targets, image-heavy emails with little text, and abrupt volume jumps from a new IP or domain.

  1. Test: send to accounts you control at the affected providers and compare results.
  2. Inventory links: check every link domain against blocklists and keep them consistent with your From domain where possible.
  3. Add basics: include a plain-text version and a working unsubscribe header.
  4. Ramp new IPs and domains: start with a few hundred messages a day and increase only while bounces and complaints stay low. This schedule is illustrative, since providers don't publish theirs.

Key features

Pros

Cons

Best for: single-campaign rejections, new templates and new link domains.

Where it falls short: when a 5.7.1 affects all your mail, the cause is almost always infrastructure or list quality.

Pricing: free aside from design and testing time.

Tip: when a template suddenly fails, diff it against the last version that delivered. Changed links are often the culprit.

Bottom line: audit content after you've ruled out blocklists, authentication and list quality.

7. Pause, suppress and escalate before you appeal

A 5xx code is permanent, so retrying the same address rarely succeeds and can add to the signals behind the refusal. The 4xx vs 5xx SMTP errors guide explains why temporary and permanent failures are handled differently.

Immediate actions:

Key features

Pros

Cons

Best for: every 5.7.1 case, as the first action.

Where it falls short: it treats the symptom, so it must be paired with a cause-specific fix.

Pricing: free.

Tip: keep a log of each rejection: time, recipient domain, full text and fix applied. It makes appeals faster and shows whether a fix worked.

Bottom line: pause and hold first, fix the cause, and only then appeal.

How do you clean a list and resend with Unlimited Verifier?

Export the list, verify it, act on the three buckets, re-import, and then confirm the other causes are clear before resending. A first pass is usually quick; most of the time goes to ESP export and re-import.

  1. Export the list from your ESP as CSV, including only the email column and any tags you need. Keep the file under 10MB.
  2. Sign up for Unlimited Verifier. The Free plan handles lists of up to 150 emails per list. Larger files need Pro, which allows up to 25,000 per list.
  3. Upload and verify the file. The email column is detected automatically.
  4. Review the three buckets. Keep Valid, suppress Invalid, and make a segment decision for Risky.
  5. Spend deep verifications on Risky. This is where extra checking most often changes a decision.
  6. Export immediately as CSV, Excel or JSON. Free results are kept 24 hours and Pro results 30 days.
  7. Re-import: mark Valid as active, add Invalid to your ESP's suppression list, and tag Risky.
  8. Send Risky only to engaged readers, such as those who opened or clicked in the last 90 days. Catch-all domains can hold real readers, so segmenting usually beats deleting.
  9. Confirm the other causes are clear: blocklist status and authentication, before resending to the affected provider.
  10. Compare the next send's hard-bounce rate with your Invalid share. If they're close, the list was the main driver. If hard bounces stay high after cleaning, return to fixes 2 and 3.
  11. For ongoing work, verify new signups weekly. Pro users can automate this with the email verification API and automation approach, and the free email checker handles spot checks.

Bottom line: one full clean plus a weekly signup check prevents list-driven 5.7.1 rejections from returning.

How do you choose the right fix for your situation?

Match your bounce text or pattern to the row below, start with that fix, then work its follow-ups.

Your situation Start with Then
Bounce text names a blocklist Fix 2 Fixes 4 and 5
Authentication or reverse DNS text Fix 3 Fix 7
Rising hard bounces after an import Fix 4 Fix 5
Only one campaign is rejected Fix 6 Fix 7
Brand-new domain or IP Fix 3 Fix 6, then ramp volume
"Access denied" or relay text Our 550 5.4.1 guide Check your own server settings
Microsoft-style NDR text Our Office 365 NDR codes list Fixes 2 and 3

For the most frequent codes and their fixes, see most common email bounce codes and how to fix them. If you're weighing verifiers, how to choose an email verifier covers the criteria.

Bottom line: the bounce text and the pattern across providers pick your starting point, and the rest follows.

What mistakes make 550 5.7.1 bounces worse?

Most avoidable damage comes from retries, skipped authentication and lost verification exports.

Bottom line: most process gaps, not the verifier itself, cause the worst 5.7.1 outcomes.

Verdict

A 550 5.7.1 bounce is a policy decision about your sending, not a verdict on one address. Read the full text, match it to a cause, and work the fixes in order: blocklists and authentication where they apply, then list cleaning and complaint control to keep the cause from returning.

For the list-hygiene fix, Unlimited Verifier offers unlimited standard verification on every plan, Valid, Risky and Invalid sorting with catch-all detection, and a Pro API for weekly signups. It won't repair DNS or blocklists, but it removes the invalid and risky addresses that feed reputation problems. You can start free and run your first list this week.

Bottom line: diagnose the cause, fix it, clean the list, then resend, rather than retrying the same message.

Cause-to-fix triage

Bounce clue Likely cause First fix
Names a blocklist Listed IP or domain Check lists, fix source, request delisting
Mentions SPF, DKIM, DMARC Authentication failure Align records, confirm with test send
Mentions PTR or reverse DNS Missing or mismatched PTR Set matching PTR for sending IP
Mentions reputation or spam Complaints or bad list Verify list, remove risky addresses
Only one provider rejects Provider-specific policy Review that provider's sender guidelines
Many providers reject at once Shared infrastructure Check IP reputation and blocklists

Frequently asked questions

Can I just retry a 550 5.7.1 email?

Not usefully. A 550 is a permanent failure, so retrying the same message to the same server will almost always be rejected again. Find the cause named in the bounce text, fix it, and then send again.

Is 550 5.7.1 the same as a blocklist error?

Not always. Blocklists are one common cause of 5.7.1, but the code is also used for authentication failures, reputation problems and content policy. The wording after the code tells you which applies.

How do I know if my IP is blocklisted?

Check your sending IP and domain against major public blocklist lookup tools and read the bounce for a link or listing name. Many providers name the list in the rejection text, which gives you the removal process to follow.

Does email verification fix 550 5.7.1?

Verification helps when the rejection comes from poor reputation caused by invalid, disposable or risky addresses. It does not fix DNS records, blocklist listings or message content, so it works best as part of a broader fix.

Why does Gmail or Outlook reject my email with 5.7.1?

Large providers usually reject for authentication gaps, low sender reputation, high complaint rates or spam-like content. Check that SPF, DKIM and DMARC pass, monitor complaints, and review the bounce text for the specific policy named.

Is 550 5.7.1 a temporary error?

No. The 5 in the code signals a permanent failure, so the server is not asking you to try again later. You need to change something about the message, sender or infrastructure before resending.

What is the difference between 550 5.7.1 and 550 5.1.1?

5.7.1 means the message was refused for security or policy reasons. 5.1.1 means the recipient mailbox does not exist. Treat them differently: 5.1.1 calls for removing the address, while 5.7.1 calls for fixing your sending setup or reputation.

How long does it take to recover from a 5.7.1 block?

It depends on the cause. Authentication fixes can take effect once records propagate, while reputation recovery typically takes weeks of clean, consistent sending. Delisting requests vary by blocklist operator.

Should I resend to addresses that bounced with 5.7.1?

Hold off until you have fixed the cause. Resending while the problem persists can worsen reputation and deepen the block. Once fixed, send a small test batch to confirm delivery before returning to full volume.

Cut Bounces and Protect Your Sender Reputation With Unlimited Email Verification

Every invalid address you send to hurts your sender reputation and your inbox placement. Verifying your list before each send means fewer bounces, healthier deliverability, and a predictable cost. With Unlimited Verifier, standard verification is unlimited on every plan, with no per-email fees.

Unlimited Verifier checks syntax, domain, MX records and the SMTP mailbox. It also detects catch-all domains and flags disposable and role-based addresses. Export a CSV from your email platform or CRM, upload and verify the list, then re-import the clean results. You can also automate checks with the email verification API.

Free Pro
Price $0 $29/month ($25/month billed annually)
Lists 25 a month, up to 150 emails each Unlimited, up to 25,000 emails each
Deep verifications 750 a month 25,000 a month
API access No Yes (100,000 emails a month)
Result retention 24 hours 30 days

Why teams choose Unlimited Verifier

Unlimited Verifier states 99.5% accuracy for deep verification.

Create a free account and verify your next list before you hit send.

Want to test a single address first? Try the free email checker.